Zone 1 Level 4 (EDIT GROUP\MIDI FILTER)

LEVEL OVERVIEW
Here you can Filter or Remap MIDI Events for the current MIDI Channel.
Key features
Input Event Filter, Controller Remapper, Controller Detector.

INPUT EVENT FILTER
Here you can include or exclude certain types of MIDI Data from effecting the Space Station.
After Touch
Global key Pressure.
Control Change
Controllers 0 to 127 (see MIDI Implementation below).
Note Off
MIDI Key Release.
Pitch Bend
Global Pitch change.
Poly Pressure
Individual Key Pressure.
Program Change
Global Tone change.
System Exclusive
Advanced MIDI message used differently by each hardware manufacturer.
Velocity
Key dynamics, initial/termination key Pressure.

CONTROLLER REMAPPER
Allows different MIDI Control Change messages and Pitch Bend to be remapped to another. All of the Remapper Pods can be used, but no two can have the same Data entry. Designed primarily for keyboards with Pitch Bend/Modulation only, any combination is possible.
Pods
Enable the Input Data to transmit the Output.
Input
Displays the currently selected MIDI message. Click Arrows to Scroll List.
Output
Displays the currently selected MIDI message. Click Arrows to Scroll List.

CONTROLLER DETECTOR
Designed to find MIDI messages for Remapping.
Start
Activates the Detector.
Stop
Deactivates the Detector.
Result
Displays findings. Click on Result and drag to Mapper Pod, release click to set.

OPTIONS SCREEN
Displays available Options.
Hold
Stores all current settings to disk, use with Fetch for undo.
Fetch
Reverts to previously Held settings.
Save + Exit
Saves the settings to the MIDI.dat File and Exits back to Zone 1 Level 1 Edit Group\Bank Assigner.
Cancel
Reverts to previous settings and Exits to previous Zone\Level.

MIDI IMPLEMENTATION

NOTE ON/OFF
Send
Plays external MIDI devices.
Receive
Plays Assigned Waves.

VELOCITY
Send
Key On/Off
Receive
Key On/Off for Volume dynamics and Envelope Attack/Release control.

AFTER TOUCH
Send
User Mixer only.
Receive
Controls part or all LFO Depth and Time values.

PITCH BEND
Send
User Mixer only.
Receive
Channel Pitch, or used for Remapping.

POLY PRESSURE
Send
User Mixer only.
Receive
LFO Depth.

CONTROL CHANGE
Send
Main/User Mixers.
Receive
See Controller list below.

PROGRAM CHANGE
Send
User Mixer only.
Receive
No internal use.

SYSTEM EXCLUSIVE
Send
User Mixer and Synchronizer.
Receive
Controls several internal elements (see System Messages below).

SYSTEM MESSAGES
System Reset
Resets all internal Addresses.
MIDI Time Code (MTC)
Time Base Synchronizing for accurate SMPTE display and Loop Mode 2 cycling.
Song Position
Tracking of external Sequencer Song Position for cycling.
MIDI Clock
Tempo Based Synchronizing for accurate Bar/Beat display and LFO/Env cycling.
Start
Starts internal/external Clocks.
Stop
Stops internal/external Clocks.
Continue
Continues internal/external Clocks.
For details on internal and external Synchronizing (see Zone 1/Level 5 Edit Group\Preferences).

CONTROLLER LIST
 Modulation (001)
 LFO 1-6 Depth.
 Main Volume (007)
 Channel Volume.
 Pan (010)
 Channel Left/Right position.
 Amplitude Attack and Release (012 and 013)
 Amplitude Envelope Attack and Release Point times.
 Balance Attack and Release (016 and 017)
 Balance Envelope Attack and Release Point times.
 Pitch Attack and Release (018 and (019)
 Pitch Envelope Attack and Release Point times.
 LFO 1 Depth and Time (020 and 021)
 LFO 2 Depth and Time (022 and 023)
 LFO 3 Depth and Time (024 and 025)
 LFO 4 Depth and Time (026 and 027)
 LFO 5 Depth and Time (028 and 029)
 LFO 6 Depth and Time (030 and 031)
 Filter 1 Cutoff Frequency (044)
 Filter 1 Resonance (045)
 Filter 1 Type [Range 0-7] (046)
 0 = Lowpass, 1 = Highpass, 2 = Bandpass, 3 = Notch, 4 -7 = 0 - 3 addition filter.
 MIDI Chase Delay Time (047)
 Values are in 10 Millisecond steps (IE: 100=1 second).)
 MIDI Chase Repeats (048)
 MIDI Chase Start Volume (049)
 MIDI Chase End Volume (050)
 Filter 2 Cutoff Frequency (051)
 Filter 2 Resonance (052)
 Filter 2 Type [Range 0-7] (053)
 0 = Lowpass, 1 = Highpass, 2 = Bandpass, 3 = Notch, 4 -7 = 0 - 3 addition filter.
 Damper Pedal (064)
 Soft Pedal (067)
 Lowers the Velocity of all new Keys.
 Soft Pedal 2 (068)
 Lowers the Velocity of all Keys.
 Hold 2 (069)
 Holds currently held Keys only, any keys played after activation will be unaffected.
 MIDI Chase On\Off  (115)
 Enables MIDI Chase on this Channel.
Filter 1 And 2 Serial\Parallel  (116)
 Enables the Filters to run in conjunction or independent from each other.
 Filter 1 On\Off (117)
 Enables Filter 1 for this channel only, removing up to 7 notes Polyphony.
 Filter 2 On\Off (118)
 Enables Filter 2 for this channel only, removing up to 7 notes Polyphony.
 Rest Loop Mode 2 (119)
 Terminates all Loop Mode 2 Cells.
 All Sounds Off (120)
 Terminates all Waves on current Channel.
 Reset Controllers (121)
 Resets all Controller Data.
 All Notes Off (123)
 Terminates any Keys Playing.